Description
Digikeijs DK50018 16-Channel Switch Decoder ~ Works With All DCC Brands!
The DK50018 is our new type smart switch decoder and can be configured through our new Digikeijs app which is available for Android and iOS.
Features
Fully compatible with the new Digikeijs app
Connect your device through Bluetooth
Free firmware updates through the Digikeijs app
DCC and MM protocol communication
Short Circuit Protection on all outputs
Load presets (all or per output) through the Digikeijs app
Easy to use switchboard through the Digikeijs app
POM cv programming still available
In development
On-going development on new presets based on user input
Easily change preset settings
Custom configuration per output through the Digikeijs app
Save custom configurations and share them with other Digikeijs app users
Technical Information
Input voltage: 12 – 24 V DC or DCC rail voltage
Output current per output: up to 3 A
Output current whole module: 3 A
Compatible with: DCC and MM
Dimensions L x W x H: 87 mm x 80 mm x 22 mm
Wired interface: DCC with MM supported
Wireless interface: Bluetooth Low Energy 4.1
Works With The Following Turnouts:
Kato – All Turnouts & Scales – Requires DR4101
Atlas – All Turnouts & Scales
Bachmann – All Turnouts & Scales
American Flyer – S Gauge
Lionel – S & O Gauge
MTH – S & O Gauge
Tortoise Switch Machines – Requires DR4101
Cobalt Switch Machines – Requires DR4101
Peco
And Others
The DIGISWITCH switching decoder is a fully programmable, multi-protocol switching decoder that can digitally switch anything imaginable on your model railway. The switching decoder has 16 switchable outlets which can, for example, switch 16 lights or 8 turnouts. The switching decoder has several presets that enable you to switch four Dutch three-light signals with number boards.
Configured as standard to operate 8 switches and equipped with various presets allowing, for example, for 16 permanent on/off switches, 8 two-light signals or 4 three-light signals. A combination of presets is also possible.
Features:
- 8 switch control for motor drives – Use the DR4101 Switch Motor Interface for Tortoise and Cobalt switch machines.
- 16 outputs with or without fluorescent light effect
- 8 Ahobs4 AKIs 4 Dutch signals Presets for Dutch, Belgian and German signal aspects.
- Multiprotocol DCC / Motorola Programmable via POM
- Maximum load of 2.5 Amps
- All outputs on one side of the module
- Works with JMRI, RocRail, Etc…
