Loading...

Digikeijs DR5033 ~ 18V Booster ~ Works With Digitrax, NCE, MRC, Lenz, Etc ~ DR5033-18V

$124.72

2 in stock

SKU: DR5033-18V Categories: ,

Description

Digikeijs DR5033 ~ 18V 3 Amp Booster.

Works With All DCC Brands!

Includes a 18V 3.5Amp Switching power supply!!

The DR5033 is a 3-Amp, H-bridge DCC booster with multiple connectivity options for all available digital command stations. The DR5033 has a number of unique features. The booster can automatically reverse the polarity (phase rotation) of its output if a connection error is detected on the rail that would otherwise cause a short circuit. The booster can be connected to any DCC system. The DR5033 has CDE (Lenz™), B-BUS™ (Roco™), L.NET-T (Intellibox™, Digitrax) and Railsniffer (PIKO™ Digi1, NCE, MRC, EcOS™ etc.) inputs.

The booster can be configured with great flexibly to suit your situation using LocoNet LNCV programming.  When connected to LocoNet, the DR5033 can optionally be switched on and off by the STOP-GO buttons on the control unit or via a (configurable) switching address. The booster then reports its status to the control unit via LocoNet and the load (0-100%) and the temperature of the H-bridge can be read out in degrees C via LNCV.  When connected to LocoNet, the DR5033 can monitor a configurable switching address, which can be used to reverse the polarity of the booster.  Furthermore, the booster can monitor 2×2 configurable feedback addresses (2x reverse polarity on, 2x reverse polarity off) which enables a short-circuit-free reverse loop circuit to be made.

  • Roco Z21/z21/MultiMaus
  • R-BUS
  • L.NET
  • Lenz DCC CDE
  • TRACK-SNIFFER
  • H-BRIDGE
  • Opto-Isolated – Must use the Track Sniffer with Common Ground Boosters.
  • RAILCOM
  • 18V / 3-Amp
  • Automatic phase detection / correction