TCS 1014 ~ MC2 ~ Small DCC Motor Decoder ~ 7 Pin JST With Hard Wire Harness ~ 5-Pack

TCS MC2 Decoder 5-Pack ~ 1014

Pack of five MC2 decoders. Standard hard-wire harnesses are included.

The MC2 is a HO and N scale decoder with a 7 pin JST socket. The MC2 is designed for use in locomotives where a T1 or M1 are too large. Close in size to the FL2, this decoder also provides motor control.

Back EMF Load Compensation:
Provides superior slow speed control and high performance under load.

Quiet Drive:
Super-quiet motor control for “buzz” free motor performance.

DC Mode:
Decoder will automatically detect DC power. You can also configure how your lighting effects function on DC.

Variable Momentum:
Allows you to make custom acceleration and deceleration curves.

Incandescent Bulb Support:
This decoder can be used with 12 Volt bulbs.

Function Remapping:
Buttons 0 through 12 may be used to control the lighting functions of this decoder.

Programmable Lighting Effects:
Choose from 20 separate user-programmable lighting effects!

Dimmable Brightness:
Configure multiple different brightness levels for your LED’s or incandescent bulbs.

Decoder Lock:
Feature which prevents accidental/unwanted programming while activated.

Airwire™ Compatible:
Fully compatible with Airwire™ operation.

User-Loadable Speed Tables:
Configure custom speed curves and set speed limits.

Specifications:

Interface Type
Hard-Wire
Direct-Plug (7-Pin JST)
Dimensions (L x W x H): 0.419” x 0.71” x 0.191” or 10.63mm x 18.02mm x 4.85mm
Scale: HO Scale N Scale
Continuous/Peak: 1.0/2.0 Amp
Total Functions: 2
Function Rating: 100 mA
12V Outputs: 2