TCS 1443 ~ MC4-KAC DCC Motor Decoder ~ 4 Functions ~ 7 Pin JST ~ 2 Pin Keep Alive Harness

TCS MC4-KAC Decoder ~ 0.419” x 0.71” x 0.191” ~ HO/N Scale ~ 1443

The MC4-KAC is a 4-function HO and N scale hard-wire decoder with a 7 pin JST socket. The MC4 is designed for use in locomotives where a T-series or M-Series decoder is too large, and more than 2 lighting functions are needed. The MC4-KAC is great for use in locomotives with ditch lights!

The MC4-KAC includes a factory-installed 2-Pin Mini Connector with Blue and Black&White wires to use when connecting Keep Alive® devices with the same 2-Pin Mini Connector. Keep Alive® devices with the connector are designated as “KA(n)-C”

Back EMF Load Compensation:
Provides superior slow speed control and high performance under load.

Quiet Drive:
Super-quiet motor control for “buzz” free motor performance.

DC Mode:
Decoder will automatically detect DC power. You can also configure how your lighting effects function on DC.

Variable Momentum:
Allows you to make custom acceleration and deceleration curves.

Incandescent Bulb Support:
This decoder can be used with 12 Volt bulbs.

Function Remapping:
Buttons 0 through 12 may be used to control the lighting functions of this decoder.

Programmable Lighting Effects:
Choose from 20 separate user-programmable lighting effects!

Dimmable Brightness:
Configure multiple different brightness levels for your LED’s or incandescent bulbs.

Decoder Lock:
Feature which prevents accidental/unwanted programming while activated.

Specifications:

Interface Type
Hard-Wire
Direct-Plug (7-Pin JST)
Dimensions (L x W x H): 0.419” x 0.71” x 0.191” or 10.63mm x 18.02mm x 4.85mm
Scale: HO Scale N Scale
Continuous/Peak: 1.0/2.0 Amp
Total Functions: 4
Function Rating: 100 mA
12V Outputs: 4