Description
TCS WOW501-Diesel For Large Scale WOWSound With Keep Alive 1605
The WOW501 is a universal, 5 Amp sound decoder for large-scale locomotives. The WOW501 includes Keep Alive® on-board for stutter-free operation. Function 5 and 6 may be programmed to control a smoke unit with a coil and fan. By programming CV58 with a value of 9, the smoke unit will react to the prime mover notch.
For a complete list of available sounds, check out the “Sounds List” under the “Documents” tab.
- CD-Quality Sound:
TCS’ world-renowned CD-quality sound. 16 Bits of resolution at 44.1kHz sample rate.
- Keep-Alive®:
Included on-board for smooth, stutter-free operation.
- Back EMF Load Compensation:
Provides superior slow speed control and high performance under load.
- Quiet Drive:
Super-quiet motor control for “buzz” free motor performance.
- Variable Momentum:
Allows you to make custom acceleration and deceleration curves.
- Incandescent Bulb Support:
This decoder can be used with 12 Volt bulbs.
- Function Remapping:
Buttons 0 through 12 may be used to control the lighting functions of this decoder.
- Programmable Lighting Effects:
Choose from 20 separate user-programmable lighting effects!
- Dimmable Brightness:
Configure multiple different brightness levels for your LED’s or incandescent bulbs.
- Decoder Lock:
Feature which prevents accidental/unwanted programming while activated.
- Airwire™ Compatible:
Fully compatible with Airwire™ operation.
- Audio Assist®:
TCS exclusive auditory feedback programming system. Program your decoder without the need to memorize CV’s!
- User-Loadable Speed Tables:
Configure custom speed curves and set speed limits.
- Throttle Modes:
Choose from multiple throttle modes to meet your operating needs.
- Proto Notch™:
A WOWSound original feature which uses TCS’ exclusive auto-adjusting BEMF technology to automatically choose the active notch sound. Prototype Mode also offers dynamic sound volumes which accurately model the real-life equivalent. Also includes pre-programmed acceleration and deceleration values.
Interface Type: Hard-Wire
Dimensions (L x W x H): 3.004″ x 1.413″ x 0.551″ or 76.3mm x 35.9mm x 14mm
Scale: O Scale G Scale S Scale
Continuous/Peak: 5/10 Amp
Total Functions: 8
Function Rating: 1A
12V Outputs: 8
